New Bearing Sleeve Set From Tekno RC
In RC, every gram counts. A lighter vehicle will corner faster and accelerate faster. Saving grams can be expensive at times. But not always…
Tales From The Team: Silly Season by Ryan Lutz
It’s that time of year when everyone in the R/C community goes out shopping for that shiny new deal that is going to radically fix their program and make them #1 in the world. With sponsorship of some level…
Tekno RC at Buggyland 3.0
Tekno RC at Buggyland 3.0 Tekno RC’s Ryan Lutz together with Ilias Arkoudaris made the trip to Madrid, Spain for the third edition of Buggyland race hosted by CARTT track in Fuencarral. Ilias reports from the race: “When the CARTT club president Miguel Izquierdo got in touch with us and asked us if we could…
Tekno RC How To Videos: Emulsion Shock Building.
Tekno RC How To Videos: Emulsion Shock Building Continuing our “How To” videos Ryan Lutz guides us through emulsion style shock building using our very durable composite shock caps TKR6018. These shocks will be more consistent on rough tracks and provide better cornering support allowing you to push the car harder. They have quickly become our Team’s favorite shock…
Tekno RC at 2016 Byron Fuels Heartland Challenge
Tekno RC’s Ryan Lutz at 2016 Byron Fuels Heartland Challenge This weekend I attended the Byron Fuels Heartland Challenge held at Fastlane Raceway in Blue Springs, MO. Friday was washed out literally as the rains kept-a-falling. Fortunately, the weather cleared for the weekend and we got three quals on Saturday and the mains on Sunday….
Ryan Lutz Sweeps SikCross 2016!
Ryan Lutz Sweeps SikCross 2016! This past weekend the Tekno Team descended upon Banning, California and the Pro-Line test track to attend the SikCross event. This was the second annual event put on by Levi Jackson and as per usual, the event was unique. There were three qualifiers with each one counting and you received…
Tekno RC How To Videos: Setting Camber
Tekno RC How To Videos: Setting Camber Camber is a very important setting of any RC car setup. It can greatly influence the handling of the car and should be adjusted according to the track conditions. Although there are a couple of different ways to set your camber some are less consistent than others. In the video below Ryan Lutz explains the…
Wicked Weekend Double for Tekno RC!
The Wicked Weekend was a success again this year not only for our finishes but for the race itself. Ryan, Joe, Matt and 640 entries (a record amount!) would be in attendance. This made for long days but the program moved along as quick as it possibly could thanks to the race directing by Lance McDonald.
Tekno RC How To Videos: Setting Toe and Bump
Tekno RC How To Videos: Setting Toe and Bump Setting toe and bump can be confusing since there are few tools that give an accurate measurement. In the video below, Ryan Lutz demonstrates a simple method to view toe and bump without using special tools. Since it is difficult to get an accurate measurement, his method…
Tekno RC Sweeps AMS 7.0!
Tekno RC Sweeps AMS 7.0! The 7th edition of the Alabama Manufacturer Shootout was held at Cullman Alabama. Tekno RC was present at the race with Factory Team drivers Ryan Lutz and Joe Bornhorst, managing the get the win in Nitro Buggy, Electric Buggy and Nitro Truggy classes. Joe Bornhorst reports back from the race:…